|
1234567
| |
|
Parts List for VSEA Bernas conv -300XP, 350D, DF3000, A2F, DF4/5 Systems
|
| |
A small picture following the Signet part number is a link to the Part Picture page. |
A "DWG" Following the PIC Column indicates a link to a Drawing of the Part or Assembly. |
A "KIT" Following the Part Description indicates it's a Kit and is a link to the Kit Parts List Page |
| A "PDS" at the far right is a link to a Signet Product Data Sheet in PDF format. |
Notes: A "Ref." following an OEM part number indicates that the Signet Products part can
replace the OEM part and that it is not the original design but rather it is an improved design. |
The initial list is in OEM part number Sequence, use the up arrows  before the Signet
Part Number or OEM Part Number to re-sort the list. |
|
|
OEM PN |
Picture |
DWG |
|
Signet Part # |
Part Description |
KIT |
|
PDS |
| 07139001 | | | | 37-7139 | Connector, 1/8T X 1/8 NPT | | | | 07142001 | | | | 37-7142 | Seal Bearing | | | | 07144001 | | | | 37-7144 | Handle | | | | 07149001 | | | | 37-7149 | Support Tube | | | | 08282001 | | | | 37-8282 | Aperture Slit | | PDS | | 08486001 | | | | 37-8486 | Compression Collar | | | | 08493001 | | | | 37-8493 | Support Plate | | | | 08883001 |  | | | 37-8883 | Filament Insulator | | | | 101200001 | | | | 37-1200 | Retaining Stud | | PDS | | 1211206008 | | | | 03-1A50 | 10-32 X 1/2 SFH | | | | 1231200406 | | | | 03-4037 | 4-40 X 3/8 SHC | | | | 1231200608 | | | | 03-6050 | 6-32 X 1/2 SHC | | | | 1231200808 Ref. | | | | 00-8050 | 8-32 X 1/2 SHC Thread Vented | | | | 1236200608 | | | | 03-6750 | 6-32 X 1/2 BH | | | | 1236200808 | | | | 03-8750 | 8-32 X 1/2 BH | | | | 1312200800 | | | | 03-8N00 | 8-32 Hex Nut | | | | 2542204 | | | | 37-2204 | O-Ring, Viton (R) /02-1204 | | | | 2553024 | | | | 37-3024 | Shaft Spacer, 1/4"I.D. | | | | 2553062 | | | | 37-3062 | Collar, 1/4"I.D. | | | | 2553074 | | | | 37-3074 | Collar, 3/8"I.D. | | | | 2808067 | | | | 37-8067 | 1/4-20 X 1-1/2 Inch Brass Threaded Rod | | | | 2866042 Ref. | | | | 30-6042 | Standoff, C/B 3/8D X 3/8L, 6-32 | | PDS | | E17060520 | | | | 37-6052 | Insulator, Fil. Insert | | | | E17060540 | | | | 37-6054 | Reflector | | | | E17060550 Ref. | | | | 30-7155 | Stainless Steel Clamp | | | | E17061080 Ref. | | | | 31-8494 | Gas Feed Tube, Enhanced | | | | E17061110 | | | | 37-6111 | Insert, Filament, TA | | | | E17061170 Ref. |  | | | 37-9192 | Hitch Pin Clip | | | | E17061180 Ref. | | | | 30-6118 | Bernas Filament, no Flats | | | | E17061250 | | | | 37-6125 | Screw, Machined, Ta | | | | E17061740 Ref. | | | | 30-6174 | A/C Base w/o Solid Source Inlet | | | | E17061750 | | | | 37-6175 | Cover, Arc Chamber, Bernas | | | | F5192001 | | | | 37-5192 | Liner, Aperture Plate | | PDS | | F5395001 | | | | 37-5395 | Ground Electrode | | PDS | | F5395001 Ref. | | | | 37-5395A | G. Electrode w/Pivot Pin installed | | PDS | | F5395001 Ref. | | | | 30-5395S | Insulator Shield | | | | F5395001 Ref. | | | | 30-5395G | Graphite Insert Replacement | | PDS | | F5396001 | | | | 37-5396 | High Voltage Electrode | | PDS | | F5397001 Ref | | DWG | | 30-5397 | Electrode Support Assembly | | | | F5398001 | | | | 37-5398 | Ground Electrode Snout | | | | F5403001 | | | | 37-5403 | Graphite Defining Aperture | | PDS | | H7269001 | | | | 37-2690 | Quad Lens Aperture | | PDS |
|
